2004 Dodge Ram Truck Diesel PCM
Part #4850355
A VIN-programmed PCM for the 2004 Dodge Ram Truck Diesel. We flash it before it leaves; you install it and drive.
2004 Dodge Ram Truck Cummins diesel ECM
2004 Ram Truck, Cummins diesel. Third-generation launch. 4.7 and then 5.7 HEMI (2003+) on gas trucks. Cummins moves from VP44 into high-pressure common rail in 2003/2004.5 — the ECM flash must match the injection system. On the 2004 Dodge Ram Truck the ECM usually sits engine bay; second-gen diesel trucks often used a firewall-mounted controller, later trucks move it to the driver fender or beside the master cylinder.
On the 2004 Dodge Ram Truck Cummins diesel this ECM commands injection timing, fueling, and boost. Common-rail trucks crank and never fire if the box never asks for rail pressure.
What we hear on these diesels
- crank-no-start after the truck sat in the rain with a leaking cowl
- no-comm on the CAN bus after a jump from a welder or charger
- dead pedal in a work zone — throttle goes to zero
- derate / limp after a new lift pump and new sensors
- Cummins that white-smokes and will not build rail pressure
We program it to your VIN before it ships, including the immobilizer so the keys you already have are the ones the car expects. Lifetime warranty. Ground shipping is $14.95.
Part Numbers
Additional Compatible Part Numbers: 4850355
FAQ
No. We program it to your VIN before it ships — calibration and immobilizer. You install it and drive.
The 17-digit VIN. If you looked it up on the site before checkout, we already have it. If not, we ask after the order. We cannot ship until we have it.
Yes. We program the immobilizer to your VIN so the keys and fobs you already have are the ones the vehicle expects.
Ground is $14.95. Once we have the VIN and the module is programmed, transit is usually three to five business days.
Lifetime warranty on the module, and a 60-day money-back window if it isn't the right fix. Call 1-888-735-1564 and we'll sort it out.