2006 Dodge Ram Truck Diesel ECM 5.9L
A VIN-programmed ECM for the 2006 Dodge Ram Truck Diesel 5.9L. We flash it before it leaves; you install it and drive.
2006 Dodge Ram Truck 5.9L diesel ECM
This ECM is the one for a 2006 Ram Truck running the 5.9L Magnum V8 or 5.9L Cummins — title tells you which. Third-generation launch. 4.7 and then 5.7 HEMI (2003+) on gas trucks. Cummins moves from VP44 into high-pressure common rail in 2003/2004.5 — the ECM flash must match the injection system.
On the 2006 Dodge Ram Truck 5.9L diesel this ECM commands injection timing, fueling, and boost. Common-rail trucks crank and never fire if the box never asks for rail pressure.
What we hear on these diesels
- no-comm on the CAN bus after a jump from a welder or charger
- derate / limp after a new lift pump and new sensors
- crank-no-start after the truck sat in the rain with a leaking cowl
- Cummins that white-smokes and will not build rail pressure
- dead pedal in a work zone — throttle goes to zero
We program it to your VIN before it ships, including the immobilizer so the keys you already have are the ones the car expects. Lifetime warranty. Ground shipping is $14.95.
FAQ
No. We program it to your VIN before it ships — calibration and immobilizer. You install it and drive.
The 17-digit VIN. If you looked it up on the site before checkout, we already have it. If not, we ask after the order. We cannot ship until we have it.
Yes. We program the immobilizer to your VIN so the keys and fobs you already have are the ones the vehicle expects.
Ground is $14.95. Once we have the VIN and the module is programmed, transit is usually three to five business days.
Lifetime warranty on the module, and a 60-day money-back window if it isn't the right fix. Call 1-888-735-1564 and we'll sort it out.